Setting up a Test Box with a 2070-2A Module

Hardware set up:

1) Turn off 2070.

2) Pull out 2070-2A board

3) Make sure switch for SP3 Disable is set to “OFF”

4) Reinsert 2070-2A module.

5) Connect TS2 2070 SDLC cable to 2070

6) Power up 2070

Controller and Testbox setup

1) Turn off Run Timer at MMà1à7

2) Go to binding MMà6à6

3) Change Sync1 to Off

4) Change Sync2 to SP5S

5) Change Async3 to SP3

6) Go to SDLC setup of TS2 Devices at MMà1à3à1

7) Turn on Terminal facilities 1-4 & detector facilities 1-4

8) Turn On Run Timer

9) On testbox software communicate with TS2 not 2070