Disconnect the non-functioning camera(s) from the GRIDSMART Processor and then connect the replacement camera(s). Wait 4 minutes before proceeding.
Once you have waited 4 minutes, connect to the Processor, launch the GRIDSMART Client, and click the appropriate Site Card.
Click Configure (pencil icon) on the Site Menu. In the Site Configuration Screen you will now have a Replace Cameras option
Select Replace Cameras and proceed by pairing the zones from your missing camera(s) with the images from your new camera(s). Configure the camera heading and height when prompted.
When done, adjust your zones and masks as needed.
Publish the changes.
How to Replace one or more cameras Print
Modified on: Mon, 17 May, 2021 at 4:45 AM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.