Issue (Solved)- Setting Processor static IP via Client does not work - GRIDSMART 6.6 : Cubic Transportation Systems

Issue (Solved)- Setting Processor static IP via Client does not work - GRIDSMART 6.6 Print

Modified on: Mon, 17 May, 2021 at 4:47 AM

Description

When setting a static IP under the Network tab in Site Settings with GRIDSMART 6.6, the network settings do not apply.

How this happens

This will occur if the Processor, running GRIDSMART 6.6 firmware, is not connected to the network you are attempting to configure.

Solution

This issue was resolved with the GRIDSMART 6.7 firmware. Prior to that, you must connect the Processor to the network you are attempting to configure via the Network Port on the Processor.

Prevention

Ensure the Processor is updated to GRIDSMART 6.7 or that the Processor is connected to the network prior to attempting to configure the network settings.

Did you find it helpful? Yes No

Issue (Solved)- Setting Processor static IP via Client does not work - GRIDSMART 6.6 Print

Related Articles