Tech Tips

TS2 TestBox/CID setup with 2070 2A
Setting up a Test Box with a 2070-2A Module Hardware set up: 1) Turn off 2070. 2) Pull out 2070-2A board 3) Make sure switch for SP3 Disable is se...
Thu, 13 May, 2021 at 2:22 PM
Installing SMCH
This bulletin provides information related to the identification and correct wiring of the SMCH (version 1 & version 2) junction boxes. This bulletin i...
Mon, 17 May, 2021 at 4:47 AM
Camera Cable, GS2 I/O Module and Network Access
Shielded Cat5e Cable Installers should only use the GRIDSMART-approved shielded cable for the camera connection to protect against Electromagnetic Interfer...
Mon, 17 May, 2021 at 4:47 AM
Troubleshooting Camera Connection
Related Technical Service Bulletins: GS2 Ground Grounding of Shielded Cat5e Troubleshooting Camera On/Off or No Image Scenarios The following ste...
Mon, 17 May, 2021 at 4:49 AM
Gridsmart App won't connect to sites
This may be caused by a permission restriction on the C:\ProgramData\GRIDSMART folder. Verify all Users have Full permissions to the folder.
Wed, 13 Mar, 2024 at 1:26 PM