Current Diagnostic data for a connected site can be displayed by clicking the stethoscope icon on the Site Menu.   Current phases and calls for a connected...

Select Info on the Site Menu.  The Publish History in the Site Info panel shows a list of all changes that have ever been published  to a site.  You can ...

Click Configure (the pencil icon) on the Site Menu to enter the Site Configuration Screen and then click Revert. Select the desired previously publis...

To reset a GRIDSMART Processor to its factory state, or Factory Default, you must be connected to the Processor through the local port or running the Client...

The primary and recommended way to interact with a GRIDSMART Processor is with the GRIDSMART Client running on a Windows PC. You connect your laptop with an...

100 meters (328 feet) without a repeater. The cable can be extended twice, up to a maximum of 300 meters (984 feet) using two GRIDSMART repeaters. Note that...

A single fisheye camera can require up to 100 GB per day.

GRIDSMART System The GRIDSMART System uses an image frame of 10 frames per second. Desktop App The Desktop App adjust the rate that it requests ...

Proper cabinet and camera grounding is critical. Use of the GS-3-SMC2 or GS-3-SMCH Smart Connect box is also highly recommended for additional surge protect...

To make or clear calls on operating zones, you must have connectivity to the site or be running GRIDSMART Client on the Processor. You must also have Admin ...